Virnig X30 42" Rotary Brush Cutter for Mini Excavator
Engineered for mini excavators, the Virnig X30 42" Rotary Brush Cutter is the compact, high‑performance attachment you need to clear dense brush and small trees up to 4" in diameter—even in tight spaces.
,
,
,
- Cut width: 42 inches, delivering a wide, efficient clearing path on each pass.
- Cutting capacity: Accepts material up to 4" in diameter for rapid brush and small-tree removal.
- Drive system: Direct‑drive Eaton motor with relief valve protection for reliable, durable performance.
- Front deck: Bolt-on, removable front deck enables 270-degree blade engagement for versatile cutting angles.
- Mounting interface: Bolt-on hanger brackets allow quick changes and broad compatibility with many excavator brands.
- Blade configuration: Rounded flywheel with 3 double‑sided blades; serrated rear deck helps back-dragging and stumps, while the design tends to bounce off obstacles.
- Debris control: Optional one or two bolt-on side curtains reduce debris thrown toward the operator; carbide teeth option enhances material shredding for a cleaner finish.
- Guarding: Standard motor guard and spindle guard protect components during heavy use.
- Weight and fit: 700 lb (without sides) or 830 lb (with sides); designed to fit a wide range of mini‑excavator lift capacities.
- Flow and speed: Designed for 15–25 GPM (22–28 GPM options available); blade tip speeds vary by flow rate to match your hydraulic system (XBC42-25 and XBC42-28 configurations).
- Material and build: Deck thickness 0.25" (top/side); constructed with Grade 50 plate (50,000 psi minimum yield) for long‑lasting rigidity in tough brush clearing jobs.
- Dimensions: Overall width 38.8" (without sides) / 52.0" (with sides); height 20.5"; depth 52.5"; deck height 5.8"; minimum cut height with bolt-on front 2.0".
- Safety note: Do not operate the cutter without a shatterproof cab to protect the operator and bystanders.
- Brand compatibility: Fits a broad range of models from Bobcat, Case, CAT, Gehl, Hitachi, Hyundai, JCB, Kato/IHI, Kobelco, Komatsu, Kubota, Mustang, New Holland, SANY, Takeuchi, and more (use as a guide—confirm fit with your machine).
The X30 rotary cutter is designed to boost productivity on jobs like roadside brush cleanup, clearing along fence lines, stream banks, and utility corridors. The combination of a wide cutting swath, 4" capacity, and a robust front/deck design means you can tackle dense vegetation in fewer passes while maintaining a clean, manageable cut. Optional side curtains and carbide teeth provide flexibility for debris control and material type, helping you tailor the setup to your site conditions. With bolt-on hanger brackets and a 270-degree blade engagement option, you can adapt the attachment to a variety of excavator configurations without sacrificing performance.
| MODEL | XBC42 | ||||
| Cut Width (Inches) | 42.0 | ||||
| Overall Width Without Sides / With Sides (Inches) | 38.8 / 52.0 | ||||
| Overall Height (Inches) | 20.5 | ||||
| Overall Depth (Inches) | 52.5 | ||||
| Deck Height (Inches) | 5.8 | ||||
| Minimum Cut Height with Bolt-On Front (Inches) | 2.0 | ||||
| Cutting Capacity, Diameter (Inches) | 4.0 | ||||
| Deck Thickness: Top/Side (Inches) | 0.25¹ | ||||
| Recommended Flow Rate (GPM) | 15-25 / 22-28 | ||||
| Approximate Weight Without Sides / With Sides (Pounds) | 700 / 830 | ||||
| Recommended Mini-Excavator Lift Capacity Over Side at Max Reach (Pounds) | Greater than 700 pounds² | ||||
| Recommended Mini-Excavator Weight (Pounds) | 8,900-26,000 | ||||
| Number of Teeth (Optional) | 12 | ||||
| MODEL | 15 GPM | 22 GPM | 25 GPM | 28 GPM |
| XBC42-25 | 9,525 | 13,970 | 15,875 | – |
| XBC42-28 | – | 9,010 | 10,240 | 11,470 |
| BOBCAT |
335, 337, 341, 435, E40R2, E42, E45, E48, E50, E55, E58, E60 E63, E88, E145, E165 |
| CASE | CX40, CX42, CX45, CX50, CX57C, CX60C, |
| CAT |
304, 304CR, 304.5, 303.5CR*, 304.5E2XTC, 304CCR, 304E2CR, 305CR 305.5DCR, 305.5ECR, 305.5E2CR, 305CCR, 305DCR, 305ECR, 306 CR |
| DEVELON | DX50-5K, DX50Z-7, DX55, DX55R-7, DX55W, DX60R, DX62R-3*, DX63-3* |
| GEHL | 603, 503Z, Z45, Z45GEN2, Z55 |
| HITACHI |
ZX40, ZX40U-2, ZX40-3F, ZX48U-3, ZX48U-5, ZX50, ZX50U, ZX50U-2 |
| HYUNDAI | R55-9, R55-9A, R60CR-9, R60CR-9A |
| JCB |
803, 8040, 8045, 8050, 8052, 8055, 8065, 45Z-1, 48Z-1, 50Z, 50Z-1, 51R 55Z, 55Z-1, 57C-1 |
| KATO / IHI | 55V-4, 60V-4, HD50V-5, HD55N-4, HD60V-5 |
| KOBELCO | SK45SRX-6E, SK45SRX-7, SK55SRX-6E, SK55SRX-7 |
| KOMATSU | PC45MR-3, PC45MR-5, PC55MR-3, PC55MR-5 |
| KUBOTA |
KX040-4, KX057-4, KX057-5, KX080-4, KX121-3S, U35-4, U48-4, U48-5 U55-4, U55-5 |
| MUSTANG | ME5003ZT, ME6003 |
| NEW HOLLAND | E55BX, E57C |
| SANY | SY50U, SY60C, SY80U |
| TAKEUCHI |
TB045, TB145, TB153FR, TB240, TB250, TB250-2, TB257FR, TB260, TB350R TB370 |
| TEREX | TC48, TC50, TC60 |
| VOLVO | EC45, EC55B, EC55C, EC55D, ECR40D, ECR48C, ECR50D, ECR50F, ECR58F ECR60E |
| WACKER | ET58, ET65, EW65, EW65, EZ50 |
| YANMAR |
SV40, SV60-6B, VIO45-5, VIO45-6A, VIO50-6A, VIO50-6B, VIO55-5 VIO55-6A, VIO57-6B |
Original: $9,894.00
-70%$9,894.00
$2,968.20More Images
Virnig X30 42" Rotary Brush Cutter for Mini Excavator
Engineered for mini excavators, the Virnig X30 42" Rotary Brush Cutter is the compact, high‑performance attachment you need to clear dense brush and small trees up to 4" in diameter—even in tight spaces.
,,, - Cut width: 42 inches, delivering a wide, efficient clearing path on each pass.
- Cutting capacity: Accepts material up to 4" in diameter for rapid brush and small-tree removal.
- Drive system: Direct‑drive Eaton motor with relief valve protection for reliable, durable performance.
- Front deck: Bolt-on, removable front deck enables 270-degree blade engagement for versatile cutting angles.
- Mounting interface: Bolt-on hanger brackets allow quick changes and broad compatibility with many excavator brands.
- Blade configuration: Rounded flywheel with 3 double‑sided blades; serrated rear deck helps back-dragging and stumps, while the design tends to bounce off obstacles.
- Debris control: Optional one or two bolt-on side curtains reduce debris thrown toward the operator; carbide teeth option enhances material shredding for a cleaner finish.
- Guarding: Standard motor guard and spindle guard protect components during heavy use.
- Weight and fit: 700 lb (without sides) or 830 lb (with sides); designed to fit a wide range of mini‑excavator lift capacities.
- Flow and speed: Designed for 15–25 GPM (22–28 GPM options available); blade tip speeds vary by flow rate to match your hydraulic system (XBC42-25 and XBC42-28 configurations).
- Material and build: Deck thickness 0.25" (top/side); constructed with Grade 50 plate (50,000 psi minimum yield) for long‑lasting rigidity in tough brush clearing jobs.
- Dimensions: Overall width 38.8" (without sides) / 52.0" (with sides); height 20.5"; depth 52.5"; deck height 5.8"; minimum cut height with bolt-on front 2.0".
- Safety note: Do not operate the cutter without a shatterproof cab to protect the operator and bystanders.
- Brand compatibility: Fits a broad range of models from Bobcat, Case, CAT, Gehl, Hitachi, Hyundai, JCB, Kato/IHI, Kobelco, Komatsu, Kubota, Mustang, New Holland, SANY, Takeuchi, and more (use as a guide—confirm fit with your machine).
The X30 rotary cutter is designed to boost productivity on jobs like roadside brush cleanup, clearing along fence lines, stream banks, and utility corridors. The combination of a wide cutting swath, 4" capacity, and a robust front/deck design means you can tackle dense vegetation in fewer passes while maintaining a clean, manageable cut. Optional side curtains and carbide teeth provide flexibility for debris control and material type, helping you tailor the setup to your site conditions. With bolt-on hanger brackets and a 270-degree blade engagement option, you can adapt the attachment to a variety of excavator configurations without sacrificing performance.
| MODEL | XBC42 | ||||
| Cut Width (Inches) | 42.0 | ||||
| Overall Width Without Sides / With Sides (Inches) | 38.8 / 52.0 | ||||
| Overall Height (Inches) | 20.5 | ||||
| Overall Depth (Inches) | 52.5 | ||||
| Deck Height (Inches) | 5.8 | ||||
| Minimum Cut Height with Bolt-On Front (Inches) | 2.0 | ||||
| Cutting Capacity, Diameter (Inches) | 4.0 | ||||
| Deck Thickness: Top/Side (Inches) | 0.25¹ | ||||
| Recommended Flow Rate (GPM) | 15-25 / 22-28 | ||||
| Approximate Weight Without Sides / With Sides (Pounds) | 700 / 830 | ||||
| Recommended Mini-Excavator Lift Capacity Over Side at Max Reach (Pounds) | Greater than 700 pounds² | ||||
| Recommended Mini-Excavator Weight (Pounds) | 8,900-26,000 | ||||
| Number of Teeth (Optional) | 12 | ||||
| MODEL | 15 GPM | 22 GPM | 25 GPM | 28 GPM |
| XBC42-25 | 9,525 | 13,970 | 15,875 | – |
| XBC42-28 | – | 9,010 | 10,240 | 11,470 |
| BOBCAT |
335, 337, 341, 435, E40R2, E42, E45, E48, E50, E55, E58, E60 E63, E88, E145, E165 |
| CASE | CX40, CX42, CX45, CX50, CX57C, CX60C, |
| CAT |
304, 304CR, 304.5, 303.5CR*, 304.5E2XTC, 304CCR, 304E2CR, 305CR 305.5DCR, 305.5ECR, 305.5E2CR, 305CCR, 305DCR, 305ECR, 306 CR |
| DEVELON | DX50-5K, DX50Z-7, DX55, DX55R-7, DX55W, DX60R, DX62R-3*, DX63-3* |
| GEHL | 603, 503Z, Z45, Z45GEN2, Z55 |
| HITACHI |
ZX40, ZX40U-2, ZX40-3F, ZX48U-3, ZX48U-5, ZX50, ZX50U, ZX50U-2 |
| HYUNDAI | R55-9, R55-9A, R60CR-9, R60CR-9A |
| JCB |
803, 8040, 8045, 8050, 8052, 8055, 8065, 45Z-1, 48Z-1, 50Z, 50Z-1, 51R 55Z, 55Z-1, 57C-1 |
| KATO / IHI | 55V-4, 60V-4, HD50V-5, HD55N-4, HD60V-5 |
| KOBELCO | SK45SRX-6E, SK45SRX-7, SK55SRX-6E, SK55SRX-7 |
| KOMATSU | PC45MR-3, PC45MR-5, PC55MR-3, PC55MR-5 |
| KUBOTA |
KX040-4, KX057-4, KX057-5, KX080-4, KX121-3S, U35-4, U48-4, U48-5 U55-4, U55-5 |
| MUSTANG | ME5003ZT, ME6003 |
| NEW HOLLAND | E55BX, E57C |
| SANY | SY50U, SY60C, SY80U |
| TAKEUCHI |
TB045, TB145, TB153FR, TB240, TB250, TB250-2, TB257FR, TB260, TB350R TB370 |
| TEREX | TC48, TC50, TC60 |
| VOLVO | EC45, EC55B, EC55C, EC55D, ECR40D, ECR48C, ECR50D, ECR50F, ECR58F ECR60E |
| WACKER | ET58, ET65, EW65, EW65, EZ50 |
| YANMAR |
SV40, SV60-6B, VIO45-5, VIO45-6A, VIO50-6A, VIO50-6B, VIO55-5 VIO55-6A, VIO57-6B |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Engineered for mini excavators, the Virnig X30 42" Rotary Brush Cutter is the compact, high‑performance attachment you need to clear dense brush and small trees up to 4" in diameter—even in tight spaces.
,,, - Cut width: 42 inches, delivering a wide, efficient clearing path on each pass.
- Cutting capacity: Accepts material up to 4" in diameter for rapid brush and small-tree removal.
- Drive system: Direct‑drive Eaton motor with relief valve protection for reliable, durable performance.
- Front deck: Bolt-on, removable front deck enables 270-degree blade engagement for versatile cutting angles.
- Mounting interface: Bolt-on hanger brackets allow quick changes and broad compatibility with many excavator brands.
- Blade configuration: Rounded flywheel with 3 double‑sided blades; serrated rear deck helps back-dragging and stumps, while the design tends to bounce off obstacles.
- Debris control: Optional one or two bolt-on side curtains reduce debris thrown toward the operator; carbide teeth option enhances material shredding for a cleaner finish.
- Guarding: Standard motor guard and spindle guard protect components during heavy use.
- Weight and fit: 700 lb (without sides) or 830 lb (with sides); designed to fit a wide range of mini‑excavator lift capacities.
- Flow and speed: Designed for 15–25 GPM (22–28 GPM options available); blade tip speeds vary by flow rate to match your hydraulic system (XBC42-25 and XBC42-28 configurations).
- Material and build: Deck thickness 0.25" (top/side); constructed with Grade 50 plate (50,000 psi minimum yield) for long‑lasting rigidity in tough brush clearing jobs.
- Dimensions: Overall width 38.8" (without sides) / 52.0" (with sides); height 20.5"; depth 52.5"; deck height 5.8"; minimum cut height with bolt-on front 2.0".
- Safety note: Do not operate the cutter without a shatterproof cab to protect the operator and bystanders.
- Brand compatibility: Fits a broad range of models from Bobcat, Case, CAT, Gehl, Hitachi, Hyundai, JCB, Kato/IHI, Kobelco, Komatsu, Kubota, Mustang, New Holland, SANY, Takeuchi, and more (use as a guide—confirm fit with your machine).
The X30 rotary cutter is designed to boost productivity on jobs like roadside brush cleanup, clearing along fence lines, stream banks, and utility corridors. The combination of a wide cutting swath, 4" capacity, and a robust front/deck design means you can tackle dense vegetation in fewer passes while maintaining a clean, manageable cut. Optional side curtains and carbide teeth provide flexibility for debris control and material type, helping you tailor the setup to your site conditions. With bolt-on hanger brackets and a 270-degree blade engagement option, you can adapt the attachment to a variety of excavator configurations without sacrificing performance.
| MODEL | XBC42 | ||||
| Cut Width (Inches) | 42.0 | ||||
| Overall Width Without Sides / With Sides (Inches) | 38.8 / 52.0 | ||||
| Overall Height (Inches) | 20.5 | ||||
| Overall Depth (Inches) | 52.5 | ||||
| Deck Height (Inches) | 5.8 | ||||
| Minimum Cut Height with Bolt-On Front (Inches) | 2.0 | ||||
| Cutting Capacity, Diameter (Inches) | 4.0 | ||||
| Deck Thickness: Top/Side (Inches) | 0.25¹ | ||||
| Recommended Flow Rate (GPM) | 15-25 / 22-28 | ||||
| Approximate Weight Without Sides / With Sides (Pounds) | 700 / 830 | ||||
| Recommended Mini-Excavator Lift Capacity Over Side at Max Reach (Pounds) | Greater than 700 pounds² | ||||
| Recommended Mini-Excavator Weight (Pounds) | 8,900-26,000 | ||||
| Number of Teeth (Optional) | 12 | ||||
| MODEL | 15 GPM | 22 GPM | 25 GPM | 28 GPM |
| XBC42-25 | 9,525 | 13,970 | 15,875 | – |
| XBC42-28 | – | 9,010 | 10,240 | 11,470 |
| BOBCAT |
335, 337, 341, 435, E40R2, E42, E45, E48, E50, E55, E58, E60 E63, E88, E145, E165 |
| CASE | CX40, CX42, CX45, CX50, CX57C, CX60C, |
| CAT |
304, 304CR, 304.5, 303.5CR*, 304.5E2XTC, 304CCR, 304E2CR, 305CR 305.5DCR, 305.5ECR, 305.5E2CR, 305CCR, 305DCR, 305ECR, 306 CR |
| DEVELON | DX50-5K, DX50Z-7, DX55, DX55R-7, DX55W, DX60R, DX62R-3*, DX63-3* |
| GEHL | 603, 503Z, Z45, Z45GEN2, Z55 |
| HITACHI |
ZX40, ZX40U-2, ZX40-3F, ZX48U-3, ZX48U-5, ZX50, ZX50U, ZX50U-2 |
| HYUNDAI | R55-9, R55-9A, R60CR-9, R60CR-9A |
| JCB |
803, 8040, 8045, 8050, 8052, 8055, 8065, 45Z-1, 48Z-1, 50Z, 50Z-1, 51R 55Z, 55Z-1, 57C-1 |
| KATO / IHI | 55V-4, 60V-4, HD50V-5, HD55N-4, HD60V-5 |
| KOBELCO | SK45SRX-6E, SK45SRX-7, SK55SRX-6E, SK55SRX-7 |
| KOMATSU | PC45MR-3, PC45MR-5, PC55MR-3, PC55MR-5 |
| KUBOTA |
KX040-4, KX057-4, KX057-5, KX080-4, KX121-3S, U35-4, U48-4, U48-5 U55-4, U55-5 |
| MUSTANG | ME5003ZT, ME6003 |
| NEW HOLLAND | E55BX, E57C |
| SANY | SY50U, SY60C, SY80U |
| TAKEUCHI |
TB045, TB145, TB153FR, TB240, TB250, TB250-2, TB257FR, TB260, TB350R TB370 |
| TEREX | TC48, TC50, TC60 |
| VOLVO | EC45, EC55B, EC55C, EC55D, ECR40D, ECR48C, ECR50D, ECR50F, ECR58F ECR60E |
| WACKER | ET58, ET65, EW65, EW65, EZ50 |
| YANMAR |
SV40, SV60-6B, VIO45-5, VIO45-6A, VIO50-6A, VIO50-6B, VIO55-5 VIO55-6A, VIO57-6B |
