✨ New Arrivals Just Dropped!Explore
Virnig v20 Low Profile Dirt Bucket for Mini Skid Steer
HomeStore

Virnig v20 Low Profile Dirt Bucket for Mini Skid Steer

Virnig v20 Low Profile Dirt Bucket for Mini Skid Steer

Meet the Virnig v20 Low Profile Dirt Bucket, built for mini skid steers and outdoor job sites that demand precise digging and tidy loading. Designed with a low back and extended bottom, it delivers improved cutting-edge visibility and efficient material handling.

  • Low Profile Design: Extended bottom and a low back maximize visibility of the cutting edge for accurate digging and placement.
  • Width Options: Available in 36", 42", 44", and 48" overall widths (inside widths: 34.6", 40.6", 42.6", 46.6").
  • Material & Thickness: 1/4" shell with 3/16" side plates provide durability for daily grading and loading tasks.
  • Grading Bend: Grading bend supports optimal reverse grading, helping control material flow and improve finish quality.
  • Weld-On Edge: 1/2" x 4" weld-on edge delivers long wear life on tough material applications.
  • Bucket Back Angle: 70-degree back angle enhances loader balance and material release.
  • Capacity & Weight: Struck / Heaped capacities vary by width—36" (5.2 / 6.2 cu ft), 42" (6.1 / 7.3 cu ft), 44" (6.4 / 7.7 cu ft), 48" (6.9 / 8.3 cu ft); approximate weights range from 195 to 240 lb.
  • Loader Compatibility: Best matched with loaders rated under 1650 lb capacity for optimal performance and balance.

This bucket is a practical upgrade for landscapers, utilities crews, and small-site contractors who need reliable performance without sacrificing visibility. The low-profile profile and extended bottom minimize blind spots and spillage, while the sturdy shell and edge construction withstand daily digging, trenching, and material spreading. With multiple widths, you can tailor capacity and reach to your mini skid steer’s lifting power and job requirements, from trench prep to clean grading. The Virnig v20 is designed to deliver consistent results, reduce rework, and keep your projects moving smoothly on small machines.


MODEL CLPB36 CLPB42 CLPB44  CLPB48
Width: Overall / Inside (Inches) 36.0 / 34.6 42.0 / 40.6 44.0 / 42.6 48.0 / 46.6
Overall Height (Inches) 15.5 / 19.5 15.5 / 19.5 15.5 / 19.5 15.5 / 19.5
Depth: Overall / Inside (Inches) 30.2 / 26.8 30.2 / 26.8 30.2 / 26.8 30.2 / 26.8
Capacity: Struck / Heaped (Cubic Feet) 5.2 / 6.2 6.1 / 7.3 6.4 / 7.7 6.9 / 8.3
Bucket Back Angle (Degrees) 70 70 70 70
Shell Thickness (Inches) 0.25 0.25 0.25 0.25
Side Plate Thickness (Inches) 0.19 0.19 0.19 0.19
Approximate Weight (Pounds) 195 215 225 240
Recommended Loader Capacity Less than 1650 pounds Less than 1650 pounds Less than 1650 pounds
Less than 1650 pounds
Select Size
Select Edge
From $244.20

Original: $814.00

-70%
Virnig v20 Low Profile Dirt Bucket for Mini Skid Steer—

$814.00

$244.20

Virnig v20 Low Profile Dirt Bucket for Mini Skid Steer

Meet the Virnig v20 Low Profile Dirt Bucket, built for mini skid steers and outdoor job sites that demand precise digging and tidy loading. Designed with a low back and extended bottom, it delivers improved cutting-edge visibility and efficient material handling.

  • Low Profile Design: Extended bottom and a low back maximize visibility of the cutting edge for accurate digging and placement.
  • Width Options: Available in 36", 42", 44", and 48" overall widths (inside widths: 34.6", 40.6", 42.6", 46.6").
  • Material & Thickness: 1/4" shell with 3/16" side plates provide durability for daily grading and loading tasks.
  • Grading Bend: Grading bend supports optimal reverse grading, helping control material flow and improve finish quality.
  • Weld-On Edge: 1/2" x 4" weld-on edge delivers long wear life on tough material applications.
  • Bucket Back Angle: 70-degree back angle enhances loader balance and material release.
  • Capacity & Weight: Struck / Heaped capacities vary by width—36" (5.2 / 6.2 cu ft), 42" (6.1 / 7.3 cu ft), 44" (6.4 / 7.7 cu ft), 48" (6.9 / 8.3 cu ft); approximate weights range from 195 to 240 lb.
  • Loader Compatibility: Best matched with loaders rated under 1650 lb capacity for optimal performance and balance.

This bucket is a practical upgrade for landscapers, utilities crews, and small-site contractors who need reliable performance without sacrificing visibility. The low-profile profile and extended bottom minimize blind spots and spillage, while the sturdy shell and edge construction withstand daily digging, trenching, and material spreading. With multiple widths, you can tailor capacity and reach to your mini skid steer’s lifting power and job requirements, from trench prep to clean grading. The Virnig v20 is designed to deliver consistent results, reduce rework, and keep your projects moving smoothly on small machines.


MODEL CLPB36 CLPB42 CLPB44  CLPB48
Width: Overall / Inside (Inches) 36.0 / 34.6 42.0 / 40.6 44.0 / 42.6 48.0 / 46.6
Overall Height (Inches) 15.5 / 19.5 15.5 / 19.5 15.5 / 19.5 15.5 / 19.5
Depth: Overall / Inside (Inches) 30.2 / 26.8 30.2 / 26.8 30.2 / 26.8 30.2 / 26.8
Capacity: Struck / Heaped (Cubic Feet) 5.2 / 6.2 6.1 / 7.3 6.4 / 7.7 6.9 / 8.3
Bucket Back Angle (Degrees) 70 70 70 70
Shell Thickness (Inches) 0.25 0.25 0.25 0.25
Side Plate Thickness (Inches) 0.19 0.19 0.19 0.19
Approximate Weight (Pounds) 195 215 225 240
Recommended Loader Capacity Less than 1650 pounds Less than 1650 pounds Less than 1650 pounds
Less than 1650 pounds

Product Information

Shipping & Returns

Description

Meet the Virnig v20 Low Profile Dirt Bucket, built for mini skid steers and outdoor job sites that demand precise digging and tidy loading. Designed with a low back and extended bottom, it delivers improved cutting-edge visibility and efficient material handling.

  • Low Profile Design: Extended bottom and a low back maximize visibility of the cutting edge for accurate digging and placement.
  • Width Options: Available in 36", 42", 44", and 48" overall widths (inside widths: 34.6", 40.6", 42.6", 46.6").
  • Material & Thickness: 1/4" shell with 3/16" side plates provide durability for daily grading and loading tasks.
  • Grading Bend: Grading bend supports optimal reverse grading, helping control material flow and improve finish quality.
  • Weld-On Edge: 1/2" x 4" weld-on edge delivers long wear life on tough material applications.
  • Bucket Back Angle: 70-degree back angle enhances loader balance and material release.
  • Capacity & Weight: Struck / Heaped capacities vary by width—36" (5.2 / 6.2 cu ft), 42" (6.1 / 7.3 cu ft), 44" (6.4 / 7.7 cu ft), 48" (6.9 / 8.3 cu ft); approximate weights range from 195 to 240 lb.
  • Loader Compatibility: Best matched with loaders rated under 1650 lb capacity for optimal performance and balance.

This bucket is a practical upgrade for landscapers, utilities crews, and small-site contractors who need reliable performance without sacrificing visibility. The low-profile profile and extended bottom minimize blind spots and spillage, while the sturdy shell and edge construction withstand daily digging, trenching, and material spreading. With multiple widths, you can tailor capacity and reach to your mini skid steer’s lifting power and job requirements, from trench prep to clean grading. The Virnig v20 is designed to deliver consistent results, reduce rework, and keep your projects moving smoothly on small machines.


MODEL CLPB36 CLPB42 CLPB44  CLPB48
Width: Overall / Inside (Inches) 36.0 / 34.6 42.0 / 40.6 44.0 / 42.6 48.0 / 46.6
Overall Height (Inches) 15.5 / 19.5 15.5 / 19.5 15.5 / 19.5 15.5 / 19.5
Depth: Overall / Inside (Inches) 30.2 / 26.8 30.2 / 26.8 30.2 / 26.8 30.2 / 26.8
Capacity: Struck / Heaped (Cubic Feet) 5.2 / 6.2 6.1 / 7.3 6.4 / 7.7 6.9 / 8.3
Bucket Back Angle (Degrees) 70 70 70 70
Shell Thickness (Inches) 0.25 0.25 0.25 0.25
Side Plate Thickness (Inches) 0.19 0.19 0.19 0.19
Approximate Weight (Pounds) 195 215 225 240
Recommended Loader Capacity Less than 1650 pounds Less than 1650 pounds Less than 1650 pounds
Less than 1650 pounds